Combination Fuse Tester and Puller
Combination Fuse Tester and Puller
Verfügbarkeit für Abholungen konnte nicht geladen werden
Find a Blown Fuse in Seconds
DC 24V Automotive Blade Fuse Tester and Puller for MINI, ATO/ATC and MAXI Fuses
Stop Pulling Every Fuse to Guess
A dead headlight, radio or wiper usually means one blown fuse somewhere in a crowded box. Yanking them out one by one wastes time and risks bending the blades.
This tool tests the fuse while it is still seated: touch the contacts to the two blade tips and the LED tells you instantly. The jaw end then clamps and pulls the dead fuse straight out.
Green Light Means Good. No Light Means Replace It.
LED indicator: green glow = the fuse still powers normally. Nothing lit = the fuse is blown.
Adjustable probe pitch: slide the pin spacing to 20 mm, 12 mm or 7 mm to match MAXI, ATO/ATC and ATM fuse sizes.
Inside a Packed Vehicle Fuse Box
Reach into tight rows of 10A, 15A and 20A blade fuses without removing them. Test, confirm, clamp and replace in one motion, so the car is back on the road instead of sitting in the driveway.
Grip a Stubborn Fuse Without Slipping
The ridged anti-slip handle and clamping jaw lock onto the fuse body, so a tight or heat-seated fuse comes out cleanly with nothing crushed and no blades left behind.
Fits in the Glovebox, Works on Every Vehicle
At 70 x 33 x 16 mm and 24 V DC rated, the plastic body is compact enough to keep on hand for the car, motorcycle, boat or RV, and tough enough to resist aging and abrasion through years of use.
One Tool for Test and Pull
Keep it in the glovebox and diagnose a blown fuse the moment a circuit dies, instead of guessing fuse by fuse.
